Apr

30

Posted by : AccessoryJack | On : April 30, 2012

FiiO ALPEN E17 is kind of high-grade and multi-functional amplifier It has many excellent functions with small shape and being portable. High performance design of amplifier is to ensure the quality of sound .Multi-input ports design makes it easy to operate .It has many ports such as PC USB or S/PDIF digital single or AUX analog signal input. With OLED screen ,the interface of E17 is so intuitive and key operation is comfortable. Available in Black color only.

Here are the Specs of the E17


  • Standard MINI USB Interface: connect with PC to make digital audio transfer possible and make battery charge possible
  • 3.5mm two-channel Headphone Output: suitable for various headphones with 16OHMS~300OHMS
  • 3.5mm SPDIF input connector: connect with high-definition player and receive PCM signal
  • 3.5mm Line In interface: connect with audio output LO&PO of audio players.
  • 18 Pin multifunctional interface: to make audio and data transfer possible in conjunction with L7 and E9.
  • work indicator: indicate power on/off and charging status
  • high-brightness of OLED dot matrix screen: display kinds of working and setting information
  • built-in high capacity chargeable Li-ion battery whose use time can reach 15H.
  • Meet listening need by adjusting GAIN , BASS, TREBLE or BALANCE.
  • Output Power: >250mW (16OHMS Loaded );>30mW (300OHMS Loaded)
  • Headphone Impedance Range: 16 OHMS ~ 300 OHMS
  • SNR:≥109dB(A weight)[AMP];≥104dB(A weight)[DAC]
  • Distortion:<0.001%(AMP);<0.007%(DAC)
  • Support sampling rate(Max):96K/24bit [USB] ;192K/24bit [SPDIF]
  • Frequency response:10Hz~100KHz[AMP];10Hz~20KHz[DAC]
  • Battery capacity, charging time and using time:1500Mah/3.5H/15H
  • Size: 96mm x 55mm x 15.2mm
  • Weight: 112g
  • Available in Black color only

You can check it out at AccessoryJack.

FiiO ALPEN E17 USB DAC Headphone Amplifier SPDIF IN 192K/24bit (Black)

Jack
30 April, 2012

Apr

27

Posted by : AccessoryJack | On : April 27, 2012

The FiiO E10 is FiiO’s newest 96k/24bit USB audio decoder (DAC) headphone amplifier. The E10 both replaces PC on-board sound cards as the primary audio decoder, which can lead to an increase in audio quality, as well as provide high quality sound amplification and drive high-powered high-end headphones. The E10 is best described as being both a professional-quality headphone amplifier as well as an external USB sound card. Available in Black color only.

Here are the Specs of the E10

  • Volume potentiometer,Barrier free design, easy to operate.Volume digital indicator, more intuitive.
  • Bass boost,OFF:0dB;ON:+3dB , built-in bass boosting circuit ,it’s different with traditional software to set the EQ, the effect of E10 will be better.
  • USB digital Audio convert to coaxial digital audio output.
  • Line output,Fixed level audio line output with full scale.
  • Support to install automatically without any driver, maximum output :96K/24Bit.
  • All- aluminum shell, enhanced anti-interference ability, thus it’s more reliable and durable
  • Power supply: Standard MINI USB port
  • Output Power: 150mW(32Ω)
  • Sample rate USB decoder: 96KHz/24 Bit (Maximum support)
  • Coaxial output: Stereo PCM
  • Frequency response: 20Hz~20KHz
  • Suitable Headphone Impedance: 16Ω~300Ω
  • Size: 79mm×49.1mm×21mm
  • Weight: 82g
  • Available in Black color only

You can check it out at AccessoryJack.

FiiO E10 96k/24bit USB DAC Headphone Amplifier (Black)
Jack
27 April, 2012

Nov

02

Posted by : AccessoryJack | On : November 2, 2011

The FiiO D3 is a quick and easy way to convert digital audio output into high fidelity stereo analog sound. It is ideal for interfacing between modern digital audio/video devices with analog amplifiers or self-powered speakers. The D3 works with any playback source with an optical (Toslink) or coaxial digital audio output. Here are just a few of the devices supported:Digital TVs and HDTVs, CD, DVD, Blu-Ray, and HD-DVD players, Apple TV, Google TV (Revue), Game consoles: PS3 (All), XBOX 360 (Slim), Satellite/Cable receivers and DVRs, TiVO, AV Receivers and Integrated Amplifiers, Digital media players and streamers. Available in Black color only.

Here are the Specs of the D3

  • Built-in high-performance phase locked loop (PLL)
  • WM8805 ultra low jitter digital receiver
  • Supports up to 192KHz/24bit audio signal
  • Optical and coaxial inputs with selection switch
  • 2 channel standard stereo RCA output
  • Indicator for digital receiving status (LOCKED)
  • MINI USB power supply port (AC adapter included)
  • Power supply?DC 5V
  • Output amplitude?1.6V?0dB Fs?
  • Frequency Response?20Hz~20KHz
  • Signal to Noise Ratio: ?90dB
  • Crosstalk: 75dB
  • Total harmonic distortion: <0.01%(10mW) - Weight:50g
  • Available in Black color only

    You can check it out at AccessoryJack.

    FiiO D3 Digital to Analog Audio Converter – 192kHz/24bit Optical and Coaxial DAC (Black)

    Jack
    02 November, 2011

Nov

01

Posted by : AccessoryJack | On : November 1, 2011

This brand new FiiO E6 is an upgrade model of E5, sound quality has been improved, built-in three different EQ with color LED indicator, redesigned volume key for easy control. The new Key Lock button prevents unattended button control, and the removable clip increase its portability. The new E6 is smaller and lighter than E5 which is your best outdoor companion, allows you to enjoy premium quality music anytime anywhere. Available in Black color only.

Here are the Specs of the E6

  • Small size, easy to carry
  • New power amplifier circuit, high SNR, low distortion
  • Adopt positive and negative power supply, satisfy with large Dynamic Signal Processing
  • Electronic volume control
  • Key lock function
  • Built-in rechargeable lithium battery, normally work above 10 hours (This for reference only)
  • Built-in three types of EQ option with different bass effect and a high level option.
  • Standard MINI USB connector
  • Removable transparent back splint (lean 45°), to meet different needs.
  • output power:150mW (16 ohm Loaded)?16mW (300 ohm Loaded)
  • SNR:?95dB(A weight)
  • Distortion:?0.009%(10mW)
  • Frequency response:10Hz~100KHz
  • Headset impedance:16 ohm ~300 ohm
  • USB power supply port:DC 5V/500mA
  • Power supply mode :Built-in rechargeable lithium battery.
  • Size:41mmx40.2mmx9mm
  • Weight:16g
  • Available in Black color only

You can check it out at AccessoryJack.

FiiO E6 Portable Headphone Amplifier (Black)

Jack
01 November, 2011

Sep

20

Posted by : AccessoryJack | On : September 20, 2011

The FiiO L9 is designed with a 3.5mm stereo jack to Apple’s dock connector, enabling output of high quality line-level audio from iPod, iPhone, and iPad that can be sent to portable audio equipment such as headphone amplifiers and power amplifiers. Designed with high-quality materials, the L9 isolates the audio signal from interference to deliver cleaner and more accurate sound from your iPod/iPhone/iPad. Available in Black color only.

Here are the Specs of the L9

  • Provides maximum isolation from electromagnetic and radio frequency interference with shielded construction!
  • Delivers better audio clarity and a more natural-sounding midrange with purity, balanced, copper conductors!
  • Creates precise contact and increased durability with a high quality connectors!
  • Length of Wire: 5.5~6cm(only cable)
  • Diameter of Wire: 4mm
  • Weight: 8g
  • Model of Wire: HPC-22
  • Mateires of Wire: PCOCC-A
  • Impedance of Wire: max. 0.07ohm
  • Insulation Resistance: min. 2 Mohm
  • Insulator: TPE
  • Sheath of Wire: TPE
  • Available in Black color only

You can check it out at AccessoryJack.

FiiO L9 Lineout Dock cable with 3.5 mm “L” Plug for iPod, iPhone, iPad (Black)

Jack
20 September, 2011

Sep

19

Posted by : AccessoryJack | On : September 19, 2011

FiiO L5 line out dock (LOD) cable for Sony Walkman MP3 designed with one 3.5mm to Sony Walkman ‘s dock connectors, Allow you to connect portable audio equipment, such as power amplifier, headphone amplifiers, to the line out of the Sony Walkman. Designed with high-quality materials, L5 isolate your signal from interference to deliver cleaner, more accurate sound from Sony Walkman. Available in Black color only.

Here are the Specs of the L5

  • Provides maximum isolation from electromagnetic and radio frequency interference with shielded construction!
  • Delivers better audio clarity and a more natural-sounding midrange with purity balanced copper conductors!
  • Creates precise contact and increased durability with a high quality connectors!
  • High quality line out dock connector audio cable for Sony Walkman MP3 player
  • Improve sound quality by taking signal from dock connector
  • Cable constructed from ultra pure copper (PCOCC-A) and TPE insulator for maximum resistance to interference
  • Short 8cm cable for convenient connection of headphone amps and reduced signal path
  • Length of wire: 8cm(only cable)
  • Diameter of wire: 4mm
  • Weight: 10g
  • Model of wire: HPC-22
  • Material of wire: PCOCC-A
  • Impedance of wire: max. 0.1 Ohms
  • Insulation Resistance: min. 2 M Ohms
  • Insulator: TPE
  • Sheath of wire: TPE
  • Available in Black color only

You can check it out at AccessoryJack.

FiiO L5 Line Out Dock Cable (3.5mm stereo plug) for Sony Walkman MP3 Player (Black)

Jack
19 September, 2011

Sep

17

Posted by : AccessoryJack | On : September 17, 2011

FiiO L3 line out dock (LOD) cable for Apple iPod, iPhone and iPad portable audio devices fitted with 30 pin dock socket and high quality PCOCC-A copper cable. Connect your iPod, iPhone or iPad to headphone amps and audio amplifiers for the best possible sound quality from your Apple player. Constructed with a signal copper grain wire (PCOCC-A) and sheathed in highly insulating TPE material the FiiO L3 offers the cleanest possible signal path for your audio signal. Designed with high-quality materials, the FiiO L3 cable isolate your signal from interference to deliver cleaner, more accurate sound. Fitted with an Apple 30 pin dock connector at one end and a 3.5mm jack plug at the other, the FiiO L3 gets your Apple player connected to headphone amplifiers and portable DACs for the best possible music experience. Designed with highest quality materials, the FiiO L3 isolates your signal from interference to deliver cleaner, more accurate sound from iPod, iPhone and iPad. Available in Black color only.

Here are the Specs of the L3

  • Provides maximum isolation from electromagnetic and radio frequency interference with shielded construction!
  • Delivers better audio clarity and a more natural-sounding midrange with purity balanced copper conductors!
  • Creates precise contact and increased durability with a high quality connectors!
  • High quality line out dock connector audio cable for Apple iPod, iPhone and iPad
  • Improve sound quality by taking signal from dock connector
  • Cable constructed from ultra pure copper (PCOCC-A) and TPE insulator for maximum resistance to interference
  • Short 8cm cable for convenient connection of headphone amps and reduced signal path
  • Length of wire: 8cm(only cable)
  • Diameter of wire: 4mm
  • Weight: 10g
  • Model of wire: HPC-22
  • Material of wire: PCOCC-A
  • Impedance of wire: max. 0.1 Ohms
  • Insulation Resistance: min. 2 M Ohms
  • Insulator: TPE
  • Sheath of wire: TPE
  • Available in Black color only

You can check it out at AccessoryJack.

FiiO L3 Line Out Dock Cable (3.5mm stereo plug) for iPod, iPhone, iPad (Black)

Jack
17 September, 2011

Sep

16

Posted by : AccessoryJack | On : September 16, 2011

FiiO L2 3.5mm to 3.5mm jack plug with high quality PCOCC-A cable. Connect your iPod, iPhone, iPad, MP3 player or laptop computer to headphone amps and audio amplifiers for the best possible sound quality from your portable audio player. Constructed with a signal copper grain wire (PCOCC-A) and sheathed in highly insulating TPE material the FiiO L2 offers the cleanest possible signal path for your audio signal. Designed with high-quality materials, the FiiO L2 cable isolate your signal from interference to deliver cleaner, more accurate sound. Available in Black color only.

Here are the Specs of the L2

  • Provides maximum isolation from electromagnetic and radio frequency interference with shielded construction! Delivers better audio clarity and a more natural-sounding midrange with purity, balanced, copper conductors! * Creates precise contact and increased durability with a high quality connectors!
  • Delivers better audio clarity and a more natural-sounding midrange with purity, balanced, copper conductors!
  • Creates precise contact and increased durability with a high quality connectors!
  • High quality 3.5mm to 3.5mm cable for connection of headphone amps and portable audio devices
  • Cable constructed from ultra pure copper (PCOCC-A) and TPE insulator for maximum resistance to interference
  • Short 10cm cable for convenient connection of headphone amps and reduced signal path
  • Length of wire:10cm(only cable)
  • Diameter of wire: 4mm
  • Weight: 10g
  • Model of wire: HPC-22
  • Material of wire: PCOCC-A
  • Impedance of wire: max. 0.1 Ohms
  • Insulation Resistance: min. 2 M Ohms
  • Insulator: TPE
  • Sheath of wire: TPE
  • Available in Black color only

You can check it out at AccessoryJack.

FiiO L2 3.5mm to 3.5mm Stereo Audio Cable (Black)

Jack
16 September, 2011

Sep

15

Posted by : AccessoryJack | On : September 15, 2011

Designed with one 3.5mm to Apple’s dock connectors, Allow you to connect portable audio equipment, such as power amplifier, headphone amplifiers, to the line out of the iPod/iPhone/iPad. Designed with high-quality materials, L1 isolate your signal from interference to deliver cleaner, more accurate sound from iPod/iPhone/iPad. Available in Black color only.

Here are the Specs of the L1

  • For Apple’s iPod, iPhone, iPad
  • Provides maximum isolation from electromagnetic and radio frequency interference with shielded construction!
  • Delivers better audio clarity and a more natural-sounding midrange with purity, balanced, copper conductors!
  • Creates precise contact and increased durability with a high quality connectors!
  • Line out dock connector audio cable for Apple iPod, iPhone and iPad
  • Improve sound quality by taking signal from dock connector
  • Short 10cm cable for convenient connection of headphone amps and other audio amplifiers
  • Length of wire: 10cm(only cable)
  • Diameter of wire: 3mm
  • Weight: 8g
  • Model of wire: AWG-18
  • Material of wire: OFC
  • Impedance of wire: max.0.5 Ohms
  • Insulation Resistance: min. 2 M Ohms
  • Insulator: PVC
  • Sheath of wire: PVC
  • Available in Black color only

You can check it out at AccessoryJack.

FiiO L1 Line Out Dock Cable (3.5mm stereo plug) for iPod, iPhone and iPad (Black)

Jack
15 September, 2011

Sep

14

Posted by : AccessoryJack | On : September 14, 2011

The FiiO E9i desktop headphone amplifier offers truly stunning audio performance and versatility to headphone and audio enthusiasts. Its sleek and modern form factor, while minimalist in appearance, belies the engineering marvel within. The E9i has exceptionally low noise and distortion, providing enough power to drive the most demanding headphones up to 600Ohm with excellent dynamics and clarity. The E9i serves as a dock for iPods and iPhones. When docked the E9i and iPod/iPhone becomes a seamless high fidelity desktop heapdhone audio system. With both a fixed and a volume controled line level output, the E9i functions well as a pre-amp for driving power amps or active monitors. Available in Black color only.

Here are the Specs of the E9i

  • Two channel power output, with jacks for both 1/8″(3.5mm) and 1/4″(6.35mm) headphones
  • TI TPA6120 current feedback power amp with low noise, low distortion and high switching rate
  • Soft on/off with sealed relay protects power amplifier output
  • Smooth and low noise ALPS sealed potentiometer for volume control
  • Audio buffers using ultra-low distortion and low noise Burr-Brown OPA2134 op amps
  • Dock connector for iPods and iPhones, also provides charging power
  • Two gain levels: Low(10dB) and High (18dB)
  • Two line-level outputs: 1/8″(3.5mm) volume controlled, and stereo RCA fixed level
  • Internal power converter module with high efficiency, precision, and low noise
  • Apple base, achieve iPod, iPhone the line out of output amplifier, charging device, connected to the computer through USB synchronization data exchange.
  • Output power: 1W (16 ohm); 80mW (600 ohm)
  • Headphone Impedance Range:16 ohm ~ 600 ohm
  • SNR: ?100dB (A weight)[LINE IN]
  • Distortion: <0.003% (100mW) [LINE IN] - Line Out: 2V rms - Powere: DC15V/ 1.5A
  • Size: 149mm × 96mm × 56mm
  • Weight: 440g
  • Available in Black color only

You can check it out at AccessoryJack.

FiiO E9i Desktop Pre-Amp and Headphone Amplifier Dock for iPod and iPhone (Black)

FiiO E9 Desktop Headphone Amplifier and Dock for E7 USB DAC (Black)

FiiO E7 USB Audio Decoder DAC and Portable Headphone Amplifier (Black)

FiiO E9 Desktop Amplifer with FiiO E7 DAC Amplifier Combo (Black)

Jack
14 September, 2011